Terra Universal's adjustable base stands provide a precise fit for a variety of equipment. Telescoping members customize the base stand to customize as needed.
How to upgrade your standard ValuLine ES Desiccator with an upgraded Smart® Humidity Module in only a few minutes. This Smart® add-on transforms your manual gas control desiccator into an automatic purge control system.
IsoDry® desiccator cabinets are the latest innovation in desiccators from Terra Universal. Many conventional desiccators depend on unassisted gas displacement. This mode of operation can significantly inhibit RH control, drive up operating costs, and increase the risk of damaged stored materials. The driving concept behind IsoDry is that unassisted gas displacement is significantly slower without a substantial physical force to actively mix nitrogen gas through the entire cabinet.
Designed for purging with nitrogen to achieve low-humidity conditions, each model includes a perforated rear plenum wall that strengthens the cabinet and allows gas to enter all chambers uniformly. Doors feature reinforcement ribs to ensure a better seal against closed-cell gasketing. The expansion latches eliminate internal scraping caused by rotary-style latches; the closing mechanism is positioned outside the chamber to keep stored materials clean.
IsoDry® Desiccator Cabinet Airflow Visualization with Dry Ice
SKU: 18905
IsoDry® Desiccator Cabinet Airflow Visualization with Dry Ice
This video provides a comparison using dry ice to demonstrate the IsoDry® Desiccator Cabinet’s rapid recovery rates. The IsoDry® system works more effectively at dissipating moisture and maintaining preset humidity levels throughout the cabinet than a cabinet configured with a standard gas plenum.
On-site nitrogen generation eliminates the need for third-party suppliers, offering control over the quantity and quality of nitrogen produced. Nitrogen generators operate using one of two key technologies: membrane-based or Pressure Swing Adsorption systems.
Adjust-a-Shelf SD-PVC Desiccator Cabinet for Dry Inert Storage
SKU: 3950-03D
Adjust-a-Shelf SD-PVC Desiccator Cabinet for Dry Inert Storage
For applications needing dry inert storage, the adjust-a-shelf desiccator cabinet is an ideal, cost-effective choice. with gas line hookups and a distributing plenum, each chamber receives a constant feed of dry, inert gas to purge them and their contents of moisture-laden air.
Smart® Stainless Steel Gas-Purge Desiccator for Semiconductor Wafer Storage
SKU: 1911-02C
Smart® Stainless Steel Gas-Purge Desiccator for Semiconductor Wafer Storage
This Smart® gas-purge desiccator is used for semiconductor wafer storage. The full stainless steel design provides excellent ESD protection. An automatic humidity controller regulates the flow of inert nitrogen gas down to 0%RH.
IsoDry® Adjust-a-Shelf Desiccator Cabinet for Semiconductor Wafer Storage
SKU: 3950-18F-ISO
IsoDry® Adjust-a-Shelf Desiccator Cabinet for Semiconductor Wafer Storage
Mobile IsoDry® desiccator cabinet in ESD-proof static-dissipative PVC, perfect for storing semiconductor wafers. With automatic nitrogen gas purge modules, wafers and electronic components are protected from both static and moisture.
The treatment of water for civic consumption demands frequent testing using hydro-sensitive materials. Dry-box desiccators such as these keep samples stable and fresh. The ValuLine™ ES desiccators in acrylic can be configured for nitrogen gas purge, or hold desiccant to keep internal moisture low.
NitroPlex™ Stainless Steel Desiccator Cabinet for Storing PCB Motherboards
SKU: 1609-12BNP
NitroPlex™ Stainless Steel Desiccator Cabinet for Storing PCB Motherboards
NitroPlex™ stainless steel desiccator cabinets are ideal for the most sensitive microelectronics, such as PCBs and motherboards. A steady supply of dry, unreactive nitrogen gas lowers internal relative humidity of each chamber down to 0% RH.
Ten Chamber Storage Cabinet Adjustable Shelves, Double Door Open and Side by Side Convenience
SKU: 1990-24
Ten Chamber Storage Cabinet Adjustable Shelves, Double Door Open and Side by Side Convenience
This ten chamber storage cabinet, with door-in-door design has adjustable shelves, and the convenience of opening a single door or the whole chamber at once
Door-on-door design lets you open only sections of the cabinet that you need access to. This minimizes the loss of inert gas inside the cabinet and also reduces the amount of outside air and contaminants that can flow inside. The inset doors are overlaid on top of two large double doors for full access to the interior of the cabinet to adjust shelving or quickly loaded/unloaded materials.
Ten Chamber Storage Cabinet Adjustable Shelves Side-by-Side, or Small Door in Door Openings
SKU: 1990-24
Ten Chamber Storage Cabinet Adjustable Shelves Side-by-Side, or Small Door in Door Openings
This ten chamber storage cabinet, with door-in-door design has adjustable shelves, and the convenience to open one smaller door-in-door eliminating contaminants, or a side-to-side for less sterile needs.
Ten Chamber Storage Cabinet, adjustable shelves with door-in door-features.
SKU: 1990-24
Ten Chamber Storage Cabinet, adjustable shelves with door-in door-features.
The ten chamber storage cabinet with adjustable shelves has the convenience of the door-in-door feature of opening all the chambers at once, or one at a time.
Stainless Steel Desiccator Cabinet with Double Doors
SKU: 1991-56B
Stainless Steel Desiccator Cabinet with Double Doors
Extra-large ISO 5 stainless steel desiccator cabinets with spacious chambers, adjustable shelving, and double doors are ideal for high-capacity storage or tall and bulky materials.
Large desiccator cabinet with two doors features a sloped top to minimize particle accumulation and simplify cleaning. Static-dissipative PVC windows stand up to frequent wipe-downs and minimize particle retention from static cling.
Ten Chamber Storage Cabinet Door-in-Door Opening and Adjustable Shelves Open
SKU: 1990-24A
Ten Chamber Storage Cabinet Door-in-Door Opening and Adjustable Shelves Open
Full ten chamber door-in-door storage cabinet has adjustable shelves and the convenience to open one smaller door-in-door eliminating contaminants, or a side-to-side for less sterile needs.
ESD-Safe Desiccator Cabinet for Semiconductor Electronics Kitting
SKU: 3950-20D
ESD-Safe Desiccator Cabinet for Semiconductor Electronics Kitting
ESD-safe desiccator cabinet for electronics kitting in SD-PVC to protect against particle and static buildup with built-in plenum to evenly distribute gas among the chambers. Doors, usually the first part to fail, are here built of high-quality components and steel frame to lengthen the life of the entire cabinet.
Nitrogen-Purged Desiccator Cabinet for Storing of Image Sensor Components
SKU: 3950-44A
Nitrogen-Purged Desiccator Cabinet for Storing of Image Sensor Components
This nitrogen-purged desiccator cabinet is used to store image sensor components in an ESD-safe, inert environment. The cabinet is fully grounded using conductive grounding tape and stainless steel trays.