Portble Laminar Flow Station

Laminar Flow Station

This positive-pressure configuration allows filtration of particles to ensure a uniform, contamination-free flow of air to the work surface. It thus provides a mini-cleanroom environment for particle-sensitive operations in the forensic industry.

This positive-pressure configuration allows filtration of particles to ensure a uniform, contamination-free flow of air to the work surface. It thus provides a mini-cleanroom environment for particle-sensitive operations in microelectronics, biotech, and many other industries. To construct your system, select a stainless steel blower module and filter housing. Note that two of each housing are required for twin (72"W or 90"W) stations.

Select the appropriate blower for your application: a 740 CFM or a 1200 CFM variable speed impeller. The higher-output blower is recommended for applications with multiple filters or that require a high-level air flow. Finally, pick the filter(s) that provide the cleanliness rating you require (refer to the efficiency ratings below). The performance illustration provides specific information on the air flow each filter provides when used with the Terra blower module. Unless otherwise specified, blower/filter modules come installed as indicated in the illustration, with the higher-rated filter positioned downstream in the filter housing.

Average flow: 800 CFM Data above reflect performace with 1200 CFM blower.

To Order:
1. Select the hood of the appropriate size and material

Polypropylene Hood (shown without bottom)

Vibration-isolated stand with free-standing hood frame isolates vibrations caused by the hood blower

Non-isolated (one-piece) stand

The Universal Hood's bottomless design allows it to be placed on virtually any work surface. For optimal performance, however, Terra recommends one of these hood stands, available in two designs (see descriptions below).

Both designs feature raised lips to hold the hood securely in place. All frames (whether isolated or not) are made of rigid square tubing with a white epoxy finish, and include stainless steel scuff sleeves to prevent scuffing along the bottom leg support. The work surface stands 32" above the floor. Be sure to select the size (large or small, single or twin) to match your hood.

Choose the work surface to suit your application (see ordering table). Subsurface polypropylene plenum chambers are available for perforated benchtops on a custom basis. These plenums (designed according to your specific requirements) serve two important functions: during chemical processing, they collect hazardous spills; and during laminar flow operations, they eliminate air-flow deflection towards the operator (an important concern when hazardous fumes may be present).

Vibration-Isolated Stands feature a two-part work surface and hood frame to isolate the work area from blower vibration, which can interfere with microscope operation.