First-of-its-kind gas control system cuts nitrogen expenses by up to 78%
Automates clean, dry benchtop storage to eliminate moisture-related degradation and optimize yields
Ideal for semiconductor components, biological and pharmaceutical samples, and other sensitive materials
Fully integrated turnkey system takes 30 seconds to install!
Terra Universal's SmartDesiccator™ maximizes yields of sensitive materials by automatically maintaining a user-determined humidity set point.
Its quick-response feedback system continuously monitors the cabinet's relative humidity level and activates a purge of dry nitrogen only when it is needed. The system thus economizes on gas consumption and minimizes overpressures that can stress cabinet seals. Comparison testing reveals that the SmartDesiccator™ maintains a low relative humidity level using only 22% of the nitrogen required by a flowmeter-based system of the identical size (see sidebar).
The miniaturized LED display and sensor module eliminate the need for external control boxes. This design also simplifies installation—operation requires only one gas and one low voltage power connection.
304 Stainless steel doors (optional on plastic chambers) restrict the door from flexing or bending, thereby preventing the cracks and fatigue that occur in all-plastic cabinets. The rigidity of the doors also ensures a tight seal between door and frame, minimizing contamination influx and gas leakage. A specially designed lift latch eliminates hinge and door damage caused by the strain of twisting and turning conventional latch systems. The SmartDesiccator™ also incorporates a one-piece, nonadhesive, nonoutgassing gasket specially formulated to retain sealing integrity in extreme low humidity. Because it won't sag or migrate, it extends the service life of the cabinet.
Prices include the humidity control module and sensor. To ensure safe pressure release, order the Automatic RB Valve. Systems are available in 304 stainless steel, acrylic or transparent static-dissipative PVC, which helps control static charges and the particles they attract.
No. 1911-41
Acrylic SmartDesiccator.™ Shown with optional shelves and 304 stainless steel door frame
No. 1911-02B
Program the desired set point in a matter of seconds!
Miniaturized LED monitors humidity and displays set point
Ambient Humidity:
60% RH
Temperature:
70°F
RH Setpoint:
10% RH
Test Period:
Achieve setpoint and then maintain it for 24 hours
Chamber Access:
Door opened once every 30 minutes; remains open for one minute
SmartDesiccator™ (blue line on chart)
To achieve setpoint:
T85 cubic feet (required 30 minutes @ 170 CFH on high flow)
Maintain for 24 hrs:
40 cubic feet
Total N2 Consumed:
125 cubic feet
Desiccator with 0 - 20 SCFH flowmeter (red line on chart)
To achieve setpoint:
85 cubic feet (required over 4 hours @ 20 CFH) Note: setpoint measured with a hygrometer, since this set up does not monitor humidity level.
Maintain for 24 hrs:
480 cubic feet (24 x 20)
Total N2 Consumed:
565 cubic feet
Smart Performance—and Big Savings!
Testing demonstrates the cost benefit of the SmartDesiccator's automated nitrogen control system.
The test at right was conducted on a desiccator equipped with a flowmeter and then with a SmartDesiccator™ control system, under the condition specified in the chart.
SmartDesiccator™ uses 22% of nitrogen consumed by standard cabinet—a 78% saving!
Hardware Clearances (add to nominal dimensions)
Plastic SmartDesiccators™
Refer to charts below for nominal dimensions. All models include electropolished stainless steel-plated wire racks that accommodate adjustable shelving (order shelves separately). For safe pressure relief, each cabinet must be equipped with an Automatic RB® (Relief/Bleed) Valve (see ordering information below). Note: All dimensions are nominal. See "Clearance Dimensions" illustration at right.
Power Requirements:
110/220VAC, 50/60HZ, (universal power supply)
Nitrogen:
inlet fitting for .25"-ODplastic tubing, regulated at 100 psi
Provides a convenient record of storage conditions! Placed in a desiccator or glovebox, this compact device accumulates humidity and temperature data at specified intervals for hours, days, weeks, even months. USB connection lets you import and display data in several formats.
Electropolished 304 Stainless Steel SmartDesiccators™
Features front and rear static-dissipative PVC viewing windows, which help control static charges and the particles they collect. Order one Automatic RB® (Relief/Bleed) Valve separately to ensure proper pressure relief. Power: 110/220VAC, 50/60HZ (universal). Nitrogen: inlet fitting for .125"-OD tubing, regulated at 100 PSI.
Door Opening: 20.25"W x 14.5"H.
Optional Shelf ID: 19.5"W x 19.25"D
All prices and specifications
are subject to change without notice. Crating charges apply to selected
items.
Call or click here for
more information on terms and conditions.
