 |
| Hinged
access door with parting curtain minimizes heat loss |
| Specifications |
Dimensions: |
36"W
x 28"D x 42"H
(30"W x 24"D x 34"H working area) |
Materials: |
Polycarbonate
(front and side of processing chamber); 304 stainless steel
(blower/heater housing and diffusers) |
Blower: |
230
CFM motorized impeller with automatic thermal protection (adjustable
40-70°C) |
| Heater: |
Dual
strip heaters mounted to aluminum fin heat exchanger. |
|
Sensor
is RTD element mounted beneath front edge of process chamber. |
|
Heated
Processing Chamber
- Ideal
for work with animals, biological samples, microelectronics-based
surgical tools, medical implants, and other critical components
requiring above-ambient calibration or testing
- Recirculation
system ensures uniform heating of the internal environment up
to 140°F
- Transparent
polycarbonate front and sides allow full visibility of chamber
- Hinged
access door with PVC parting curtain allows introduction of
large materials when opened, provides convenient access with
minimal heat loss when closed
- Dual
air diffusers and plenum-chamber ensure uniform circulation
of heated air
This
processing chamber responds to a growing trend in the medical
and biotechnology industries: more and more temperature-sensitive
microelectronic devices are being introduced into the human body,
where reliable operation at above-ambient temperatures is a matter
of life or death.
By
providing a precisely regulated, uniform, traceable processing temperature
from ambient to 140°F, this chamber simulates the working environment
of microcircuits or biological samples during processing and testing
operations.
Its
low-profile, EMI-shielded impeller blower circulates air through
the heat exchanger. A time proportional controller with RTD probe
allows adjustment of the set-point up to 140°F (60°C);
its LED readout displays set-point and process temperatures in either
Fahrenheit or Celsius, and an RS-232C interface allows remote monitoring
and control by means of a PC.
The
polycarbonate chamber combines complete visibility with protection
against thermal stress. The hinged front door includes strips that
allow insertion of an operator's hands with minimal heat loss. Top
and bottom stainless steel diffusing shields feature perforations
of differing sizes that ensure uniform circulation of air throughout
the chamber; a micro-screen positioned above the lower diffuser
prevents small parts from falling into the plenum area. A 3-inch
stainless steel utility shelf is mounted on the rear wall of the
chamber, and a sliding door on the left side accommodates any electrical
service lines that may be required by processing equipment used
inside the chamber.
Heated
Processing Chamber
 |
Cat.
# |
$/Each |
| 110VAC/60Hz |
1110-05 |
Login |
| 220VAC/50Hz |
1110-05-220 |
Login |
|
|
Fluorescent
Light
Externally
mounted. Germicidal UV light also available.
Cat.
# |
$/Each |
|
1110-30 |
Login |
|
|
